Check your building’s HVAC system to see the status, make adjustments, respond to hot/cold calls quickly and get more done in your day.
The Tracer BAS Operator works with the Trane building automation system controller: Tracer SC version 3.6 and higher. The BAS Operator is fully integrated with Tracer SC – just log in to view your building!
The Trane BAS Operator Features:
Manage Alarms
• See the active and historic alarms in your system, their severity and what generated the alarms.
• Acknowledge new alarms and add comments for others to see
• Keep the alarm log tidy with the delete alarm functionality
View Status
• See what’s happening in spaces, with equipment and entire systems.
• Built-in graphics for easy to read status, at a glance, including animations.
Take Action
• Respond to hot/cold calls by adjusting setpoints, overriding equipment and occupancy.
A feature of BAS Operator is it remembers the connection information for your connected devices. This is very helpful! However, when Updating to a new version, do not Un-install (or delete) the old version. Doing so will erase the device connection data.
New 2.0 version does not allow changing set points on RTU
RushRevere
Before version 2.0, I was able to change the set points of the RTUs we have listed under the “Equipment” page, but can no longer do this. Please add this function/feature back as it is critical for me to keep my building at the correct temperature throughout the year.
Needs an update
Windows guy
The app for the most part works. There are a few tweaks I recommend. When I select one of the space units to adjust something the screen refreshes back to the top of the list. I would like if it went back to where I left off so I don't have to scroll down the list again. I have a very large list. Another thing is I can't make any adjustments other than occupancy status and temp for space units. When I use the Tracer SC on my computer I can adjust a lot more. It would be nice to do the same with this app. Lastly I can't make any adjustments to air handlers at all from the app. I would like to have that freedom as with the Tracer SC interface.
App is getting better
hot review
The app is getting better with every update. Keep up the good work. Please listen to the comments below. Scheduling update is a huge step in the right direction. I would ask for notifications in some of the upcoming releases. Also the ability to enable and disable thumbwheels with a click of a check box. Keep up the good work
Works but glitches
Bcontrols
The app works but once you disconnect site, you no longer can see the device list… you have to exit the program and then go back in. There are other glitches that I experience as I go through it, just not enough time to write about them.
Support for new equipment types.
Support for additional BACnet object data types (IV, PIV, LAV, CSV, DTV).
الإصدار: 2.22
أوضح المطور "TRANE U.S. INC" أن ممارسات خصوصية التطبيق قد تتضمن معالجة البيانات على النحو الموضح أدناه. لمزيد من المعلومات، الرجاء الاطلاع على سياسة خصوصية المطور .
البيانات المرتبطة بك
قد يتم جمع البيانات التالية وربطها بهويتك:
الموقع
معلومات الاتصال
المعرفات
بيانات الاستخدام
التشخيص
قد تختلف ممارسات الخصوصية، على سبيل المثال، حسب الميزات التي تستخدمها أو حسب عمرك. معرفة المزيد
تسهيلات الاستخدام
لم يشر المطور بعد إلى ميزات تسهيلات الاستخدام التي يدعمها هذا التطبيق. معرفة المزيد
