- All in one: The testo Smart App supports you with measurements on refrigeration, air conditioning, and heating systems, as well as in ensuring the safety and quality of food and frying oil, and in monitoring indoor climate and storage conditions.
- Fast: Graphically descriptive display of measured values, e.g. as a table, for quick interpretation of results.
- Efficient: Create digital measurement reports including. photos as PDF/ CSV files on site and send them via e-mail.
The testo Smart App is compatible with the following Bluetooth®-enabled measuring instruments from Testo:
- Thermal imager testo 860i for smartphones
- All Testo Smart Probes
- Digital manifolds testo 550s/557s/558s/550i/570s and testo 550/557
- Digital refrigerant scale testo 560i
- Vacuum pump testo 565i
- Flue gas analyzer testo 300/310 II/310 II EN
- Vacuum gauge testo 552
- Clamp meter testo 770-3
- Volume flow hood testo 420
- Compact HVAC measuring instruments
- Frying oil tester testo 270 BT
- Temperature meter testo 110 Food
- Dual purpose IR and penetration thermometer testo 104-IR BT
- Data loggers 174 T BT & 174 H BT
- Online data loggers testo 160, testo 162 & testo 164 GW
Applications with the testo Smart App
Refrigeration systems, air conditioning systems and heat pumps, heating systems, indoor air quality:
- Leak test: Recording and analysis of the pressure drop curve.
- Superheat and subcooling: Automatic determination of condensation and evaporation temperature and calculation of superheat / subcooling.
- Target superheat: Automatic calculation of target superheat
- Automatic refrigerant charging by weight, by superheat, by subcooling, and by target superheat
- Vacuum measurement: Graphical progress display of the measurement with indication of start and differential value
Indoor climate monitoring:
- Indoor air quality: automatic calculation of the dew point and wet-bulb temperature
- Temperature, humidity, lux, UV, pressure, CO2: the right data logger for every application – from a single solution to an online monitoring system"
Ventilation systems:
- Volume flow: After the intuitive input of the duct cross-section, the app calculates the volume flow fully automatically.
- Diffuser measurements: simple parameterisation of the diffuser (dimensions and geometry), comparison of the volume flows of several diffusers when setting up a ventilation system, continuous and multi-point average calculation.
Heating systems:
- Flue gas measurement: Second screen function in combination with testo 300
- Measurement of gas flow and static gas pressure: Also possible parallel to the flue gas measurement (delta P)
- Measurement of flow and return temperatures (delta T)
Thermography:
- Determining Delta T on heating, refrigeration/air conditioning, and industrial systems
- Detecting hot/cold spots
- Assessing the risk of mold
Food safety:
Temperature Control Points (CP/CCP):
- Seamless documentation of measured values to fulfill HACCP specifications
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance
Frying oil quality:
- Seamless documentation of measured values as well as calibration and adjustment of the measurement instrument
- Individually definable limit values and measurement comments within the App for each measurement point
- Reporting and data export for regulatory requirements and internal quality assurance
---------------------------------------------------------
Terms of Use:
https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Privacy Policy:
https://www.testo.com/en/company/privacy-policy-app
App can’t remember it’s installed weak Bluetooth range.
Sundayracer
As with many other frustrated users. After using the old app successfully for years. I removed then replaced the old "testo Smart Probe App" with the new "testo Smart App". As other users stated. Once launched, It continues to ask you to install the new app. Clicking on install, takes you back to Apple apps which then gives you the option to open the app. This occurs every thine the app is opened. Also when using the 605i (even with fresh batteries). Bluetooth range averages 7-8 feet. It’s as if the refer walls are blocking the signal. Paid hundreds of dollars for the Testo kit with (1) 605i, (2) 549i. Having not used the 549i yet. I’m sure their quality… Though, did I make the wrong choice of equipment, due to poor software design. Their useless without the integration.
Phản Hồi Từ Nhà Phát Triển
Hello, We apologise that you are having problems with the app. So could you please try the following: 1. Deinstall proper all the Apps, means "testo Smart Probes" and also "testo Smart". 2. Now install the "testo Smart App" freshly from the Apple App Store. Does it now work? (no messages again to install the new App)? Could you please tell us the partnumber of your Smart Probes? The "old" Smart Probes have a lower BT range than the "new" Smart Probes. Best regards, Testo App Team
Needs work, but good.
CameronCL
I’d rate it a full five stars but while in refrigeration measurement you cannot record either supply, return or ambient at the same time.If I can add this to my field report, which is honesty way nicer than the fieldpiece job link app, I’d change this to five stars.It is however a very nice software to record real time data for customers and the graphs really do help you catch problems the naked eye normal wouldn’t see. There’s also different measurements that make this the best hvac app in the trade.
Love this app and the tools, One problem though…
ChillerTech6363
I am a commercial/industrial chiller technician, and I use my testos daily. Absolutely love them, have had them since I first got in the field. However, recently I am noticing that the saturation temperature is displayed at the bottom of the UI, on its own tab now. Instead of directly under the pressure reading. Not sure if it is a bug or new addition, however I’m severely concerned. This makes referencing less easier and less comfortable than it used to be, and I would love to see it be able to be toggled, or removed.
Phản Hồi Từ Nhà Phát Triển
Wow, thank you so much for the 5-star rating! We’re truly delighted to receive your positive feedback.Regarding the issue you mentioned, it’s unfortunately a bug, not a feature. We’ve been working for several days to reproduce it, but so far, we haven’t been able to replicate it on our iPhones. Could you let us know which iPhone model and iOS version you’re using?It would be a great help if you could send us an email at appsupport@testo.de with this information. Thank you in advance for your support!Best regards,Your Testo App Team
Good tools, good app with a major problem
RNetCorp
Hello,I am an HVACR student in college and use Testo probes. Overall I love the tools themselves however as other students began to buy and use their own a major issue has arisen. The Testo app scans for probes to connect to in the background, normally if your the only one with probes this isn’t an issue. However if someone within range (ie 10’ away) is also using Testo probes, the app will also try to connect to his/her probes and their phone to your probes. As far as I know there is no way to turn this automatic scanning and connecting off.Please Testo update the app to allow users to toggle discovery of new probes. Or at least blacklist new probes so that the app will not try to connect to 14 other peoples probes.
Phản Hồi Từ Nhà Phát Triển
Hello, you are right, this is a bit of a hassle. But you can switch in the sensor list (main menu entry "Sensors") between allow connection or not. We hope this helps in the first instance. Nevertheless we are working on this topic right now to make it more intuitive. So please stay tuned. Best regards, the Testo App Team
- testo Smart Connect Cloud – Connect your testo Smart App to the all-new testo Smart Connect Cloud for intuitive, central data management.
Phiên bản 31.31.31
Nhà phát triển, Testo SE & Co. KGaA, đã cho biết rằng biện pháp thực hành quyền riêng tư của ứng dụng có thể bao gồm việc xử lý dữ liệu như được mô tả ở bên dưới. Để biết thêm thông tin, hãy xem chính sách quyền riêng tư của nhà phát triển .
Dữ Liệu Không Liên Kết Với Bạn
Dữ liệu sau đây có thể được thu thập nhưng không liên kết với danh tính của bạn:
Vị Trí
Mã Định Danh
Dữ Liệu Sử Dụng
Chẩn Đoán
Biện pháp thực hành quyền riêng tư có thể thay đổi, ví dụ như dựa trên các tính năng mà bạn sử dụng hoặc tuổi của bạn. Tìm hiểu thêm
Trợ năng
Nhà phát triển vẫn chưa cho biết ứng dụng này hỗ trợ những tính năng trợ năng nào. Tìm hiểu thêm
Thông Tin
Người bán
Testo SE & Co. KGaA
Kích cỡ
183 MB
Danh mục
Hiệu Suất
Tương thích
Yêu cầu iOS 18.0 trở lên.
iPhone Yêu cầu iOS 18.0 trở lên.
iPad Yêu cầu iPadOS 18.0 trở lên.
Máy Mac Yêu cầu macOS 15.0 trở lên và máy Mac có chip Apple M1 trở lên.
