ConXus

Name: ConXus
Rating: 2.5 (27 reviews)
Author: Lochinvar LLC

工具程式

免費 · 專為 iPad 設計。尚未針對 macOS 驗證。

27則評分
年齡分級

4+
歲
類別

工具程式
開發者

Lochinvar LLC
語言

EN
英文
大小

20
MB

From anywhere in the world, check operating conditions, receive status alerts and modify boiler parameters, using a smart device. From a single boiler to an 8-unit cascade system, check operating status or reprogram any boiler function. Wherever you are, you’ll be able to control set points, domestic hot water, reset curves, pump controls and more. Con-X-Us mobile connect will keep you in touch and in control.

評分與評論

2.5

(滿分 5 顆星)

27則評分

Registration issues, landscape lock, & naming
2022/03/18
Annoyed with your product
Couldn’t the first two boilers to register, then without changing an info enter in my second armor registered all the sudden and then the first did as well. Having same issue with another pair but the first still won’t register and then another outta a third pair that won’t register as well. Also like others said it locks you into landscape. Lastly once registered you can’t rename. I named a pair backwards by mistake trying to register them and can’t rename them to correct my mistake.
Registration issues, landscape lock, & naming
2022/03/18
Annoyed with your product

Couldn’t the first two boilers to register, then without changing an info enter in my second armor registered all the sudden and then the first did as well. Having same issue with another pair but the first still won’t register and then another outta a third pair that won’t register as well. Also like others said it locks you into landscape. Lastly once registered you can’t rename. I named a pair backwards by mistake trying to register them and can’t rename them to correct my mistake.
Great concept; info never updates
2018/05/02
JanWalker47
Update to my review: v 3.0.4 does make a difference because I can now store maintainer info. (Oops. Nope. It started through one logout but then disappeared again.) However, when I try to change operating parameters like setpoints, nothing happens. The update attempts still time out every time. The graph never shows anything. Basically a big disappointment. Try a non-Apple device.Original review: It got installed and I got registered. Got the board connected but there was poor wireless signal. (Replaced cable modem.) If you can manage wired Ethernet, I strongly recommend that because the app does not report to you if the unit goes offline.My biggest issue is that the board and the app are not communicating. I can't change settings via the app. I believe this is iPhone/iPad specific. The service techs have been looking at this but can't explain why it doesn't work.My other complaint is a design issue- many of the values shown on the screens are irrelevant, depending on your system configuration. It is a lot of work to remember which parts of the display are relevant. Too bad you can't customize the app for the actual configuration.
Great concept; info never updates
2018/05/02
JanWalker47

Update to my review: v 3.0.4 does make a difference because I can now store maintainer info. (Oops. Nope. It started through one logout but then disappeared again.) However, when I try to change operating parameters like setpoints, nothing happens. The update attempts still time out every time. The graph never shows anything. Basically a big disappointment. Try a non-Apple device.Original review: It got installed and I got registered. Got the board connected but there was poor wireless signal. (Replaced cable modem.) If you can manage wired Ethernet, I strongly recommend that because the app does not report to you if the unit goes offline.My biggest issue is that the board and the app are not communicating. I can't change settings via the app. I believe this is iPhone/iPad specific. The service techs have been looking at this but can't explain why it doesn't work.My other complaint is a design issue- many of the values shown on the screens are irrelevant, depending on your system configuration. It is a lot of work to remember which parts of the display are relevant. Too bad you can't customize the app for the actual configuration.
A couple odd probs but overall good
2021/01/11
Goldco
Yes, like others reviewers say, there is a landscape lock problem that screws up your phone on occasion, and there is a problem where if you access your boiler via local net then it won’t show up later remote over internet unless you close the app and restart, and vice versa.Also, I have a strange problem where my boiler shows system return temp at the boiler, but the app always shows zero!!!However the app, at the end of the day is still really useful, just has a few bugs and also one of the poorest UI’s I’ve experienced. Very difficult to find where things are hidden.
A couple odd probs but overall good
2021/01/11
Goldco

Yes, like others reviewers say, there is a landscape lock problem that screws up your phone on occasion, and there is a problem where if you access your boiler via local net then it won’t show up later remote over internet unless you close the app and restart, and vice versa.Also, I have a strange problem where my boiler shows system return temp at the boiler, but the app always shows zero!!!However the app, at the end of the day is still really useful, just has a few bugs and also one of the poorest UI’s I’ve experienced. Very difficult to find where things are hidden.
Graph Feature Mod Suggestion
3月15日
Indazone8
Would be a useful feature to be able to select the start/stop date/time for the x-axis. It currently is set for a fixed start date of several weeks in the past. Be better if we could select the start date to be say 24 hours ago or even 1 hour ago so the plotted data would have more time resolution.Would also be more useful if the Lochinvar Boiler and this app could be synced to real (NTP) time. Right now time seems to be displayed based on Lochinvar Boiler time which is losing more than 30 minutes each day.
Graph Feature Mod Suggestion
3月15日
Indazone8

Would be a useful feature to be able to select the start/stop date/time for the x-axis. It currently is set for a fixed start date of several weeks in the past. Be better if we could select the start date to be say 24 hours ago or even 1 hour ago so the plotted data would have more time resolution.Would also be more useful if the Lochinvar Boiler and this app could be synced to real (NTP) time. Right now time seems to be displayed based on Lochinvar Boiler time which is losing more than 30 minutes each day.

General stability and compatibility improvements to support the latest iOS release Included iOS 17 compatibility updates needed for current third-party dependencies

版本 3.4.1 4月9日

不會與你連結的資料

系統可能會收集以下資料，但不會將其與你的身分連結：
- 診斷

依據你使用的功能或你的年齡等因素，隱私權實務可能有所不同。更多內容

輔助使用

資訊

銷售商: Lochinvar Corporation
大小: 20 MB
類別: 工具程式
相容性: 需要 iOS 17.6 或以上版本。

iPhone
需要 iOS 17.6 或以上版本。

iPad
需要 iPadOS 17.6 或以上版本。

Mac
需要 macOS 14.6（或以上版本）以及配備 Apple M1（或以上版本）晶片的 Mac。

Apple Vision
需要 visionOS 1.3 或以上版本。
語言: 英文
年齡分級: 4+

4+

進一步瞭解

開發者網站

隱私權政策

你可能也會喜歡

檢視

Taco Control

工具程式
檢視

ICM Omni

工具程式
檢視

tekmarNet

工具程式
檢視

TurboTool™

工具程式
檢視

ecom® ecommander

工具程式
檢視

LGMV-Business

工具程式
檢視

Belimo Assistant 2

工具程式
檢視

Nexa Platform

工具程式
檢視

Lennox Prodigy

工具程式
檢視

Grundfos GO Remote - Pump Tool

工具程式

ConXus

評分與評論

Registration issues, landscape lock, & naming

Great concept; info never updates

A couple odd probs but overall good

Graph Feature Mod Suggestion

新功能

App 隱私權

不會與你連結的資料

輔助使用

資訊

你可能也會喜歡

Taco Control

ICM Omni

tekmarNet

TurboTool™

ecom® ecommander

LGMV-Business

Belimo Assistant 2

Nexa Platform

Lennox Prodigy

Grundfos GO Remote - Pump Tool