Truck Explorer
Truck Explorer
Free
Truck Explorer® is a unique tool on the market for special operations on MERCEDES, MAN, IVECO, Freightliner, MAZ, KAMAZ, CLAAS, PONSSE, UNIMOG and other trucks, buses and industrial machines. It allows to read/write memory (FLASH/EEPROM) of ECUs, make IMMO OFF operation, program new keys, calculate special access codes (VeDoc X1, X2, X8; FDOK XT, XN etc.).
Most of operations can be easily done via OBD port without any ECU disassembling or soldering works. This feature makes Truck Explorer® a must-have tool for independent truck repair workshops and chiptuning service providers.
WARNING: External VEI® (Vehicle Explorer Interface®) device V6 and special license are required to run this software. Please visit www.autovei.com or www.truckexplorer.pro to obtain them.
For different vehicles brands we offer additional accessories and software licenses.
more What's new:
new ECU versions:
* EMS2.3 (Volvo) part number 21900541
* VCM2 firmware version VCM_SW_WP8_rel3
* many FMR/FR/CPC2 versions
changes:
* do not allow TCM/MCM pairing if ECU is already paired (to avoid "error 3.5" during pairing of already paired ECU)
fixed:
* Faults clear for MP4 ECUs over DC (for some ECU versions faults were back after power off/on)
* Home page flickering without internet connection
* In some cases app crashed on startup (was "Internal error")
7.8.22152 13/03/2025
What's new:
* new: CPC3/CPC3Evo radiator grille shutter parameter (price 10 tokens)
* new ECU versions: MR firmware version 26E
* new ECU versions: CPC4 firmware version R47
* new ECU versions: EDC7UC31 (Iveco) version E.0.2
* new ECU versions: many FMR/FR/CPC2 versions
* changes: writing loader part over DC/OBD for Scania EMS S7, S8 (was not written before to avoid ECU brick)
* fixed: FR/CPC parameters read (was "internal error" when first ECU communication failed and we retried)
* fixed: CPC4 speed limit read (was "internal error" for some ECU versions)
* fixed: MR/CNG (hardware type G2) memory operation works ok now (was "error 0.3" after 99%)
* fixed: MR hardware type A8b memory operations works ok now (was "internal error")
* fixed: show correct loader/firmware versions for JTAG dongle after update failed
* fixed: IRRF MIRkey reading info (sometimes generated "internal error")
* fixed: CPC3Evo retarder related parameters (was "internal error")
7.8.21878 07/01/2025
What's new:
* new: Scania OPC4 memory operations via DC/OBD (needs Scania_OPC4 license)
* fixed: FR/CPC memory analyze via DC/OBD (was "error 3.6")
7.8.21754 30/11/2024
What's new:
* new: Scania COO7/COO8 "add keys" via OBD (needs Scania_Keys license)
* new: Scania EMS S6/S7/S8 unpair via DC/OBD (price 20 tokens)
* new: Scania COO7/COO8 unpair via DC/OBD (price 20 tokens)
* new: Scania COO7/COO8 + EMS S6/S7/S8/MD1 pair via OBD (price 20 tokens)
* new: Scania COO7 cruise control speed limit change (price 5 tokens)
* new ECU versions: MCM2.1 diag version 000B20
* new ECU versions: CPC4 diag version 020004, 02000D
* new ECU versions: CPC5 diag version 023004, 023009
* new ECU versions: EBS3 (Wabco, KAMAZ) diagnostic version 9070B02
* new ECU versions: Doosan EDC17CV41
* new ECU versions: EMS 2.4 (Volvo) part number 24273022
* fixed: EIS (Mercedes) connect via DC is more stable (sometimes was "error 0.3")
* fixed: "Wi-Fi configure" works more stable now (sometimes was "internal error")
* fixed: GS3.3 (Iveco), GS3.6 (DAF) B BSL connect should work more stable (baudrate was decreased)
7.8.21718 26/11/2024
What's new:
* new: EMS S6/S7/S8 (Scania) checksums
* new: TMS2 (Scania) internal FLASH read/write over OBD (needs Scania_TMS license)
* new: TMS2 (Scania) speed limit (price 5 tokens)
* new: CR41 (EDC17C66, Mersedes V class) GPT memory operations (DC2 cable same as for CR60; needs MB_CR41 license)
* new: EDC17C49 (Iveco Daily) GPT memory operations (needs Iveco_EDC17C49 license)
* new ECU versions: EMS 2.3 (Volvo) part number 21929666
* new ECU versions: CPC4 diagnostic version 0020613
* fixed: EIS key status (inserted/not inserted) works stable now
* fixed: CPC3 parameters (was "internal error" if MB_EXTRA license was missed)
* fixed: JTAG FLASH operations for brand new COO8 (was "JTAG error" after 5%)
7.7.21481 03/10/2024
What's new:
* new: COO7/COO8 PIN read over DC/OBD (price 10 tokens)
* new (minor): MAN FFR-ME7 (old MAN CNG engine controller) pairing
* new (minor): IRRF can be used for MAN PTM/FFR keys operations
* new (minor): keys info for Scania COO8
* new ECU versions: CPC4 diag version 020010
* new ECU versions: MCM2.1 NTG versions
* new ECU versions: Iveco EDC17CV41 version F.1.2
* new ECU versions: MAN PTM 81.25805-7324
* fixed: Scania COO7, EMS S8/EMD1, EEC3 JTAG memory operations with second EEPROM (was always used first EEPROM before)
* fixed: IRRF updates should work stable now (sometimes was "error 11.0" during update)
* fixed: show correct COO immo status (was "error 3.5" before)
* fixed: CPC3 (bus versions) memory operations (was "error 3.5" during "Memory analyze")
7.7.21354 29/08/2024
* new (minor): CPC5 transmission mode "Economy"
* fixed: IRRF updates should work more stable now (sometimes was "error 11.0" during update)
* fixed: Iveco GS3.3 BSL mode for some hardwares (was "error 3.8" or "unknown version" before)
* fixed: CGW parameters are available only for ECUs we support
7.6.21238 25/07/2024
What's new:
* CGW retarder parameter (price 10 tokens)
* Mercedes INS (SFTP) Control Unit List Teach-In operation (price 10 tokens)
New ECU versions: CPC3 diagnosis version 020110
Changes: MCM retarder parameter price is 10 tokens (was 20 tokens before)
Fixed:
* TCM (Wabco) JTAG EEPROM operations (was always "error 10.8" before)
* Show correct FBS4 SSID (before it was always shown wrong)
* Iveco INS faults clear (was always "error 3.5" before)
7.6.21161 04/07/2024
New:
* CPC5 parameter for transmission mode (price is 100 tokens)
* CPC3/MCM2.1 parameters for retarder off/on (price is 60 tokens in total)
Fixed:
* FFR/PTM FLEET mode revised & fixed
* IVECO PIN calculation
* Handle correctly situations when calculation server is not available
7.6.21057 12/06/2024
New:
* Volvo EMS 2.4 GPT
* Iveco dashboard (Siemens) BSL operations
* Mercedes truck/bus, Freightliner fault descriptions refreshed
New ECU versions:
* EDC17CV41 for Doosan
* FR "A 000 446 60 02"
Fixed:
* JTAG write operations for Volvo EMS 2.2/2.3 are faster now (optimized)
* GSII memo operations over OBD
* Iveco EDC17CV41 read faults over DC
* Scania EMS S7 (BDM mode) with internal FLASH locked is handled correctly now
7.6.20944 04/06/2024
What's new:
* Scania COO8 and EEC3 memory operations via DC/OBD
New ECU versions:
* EDC7C32 from MAN CLA (Cargo Line Asia)
* MD1CE100 (KAMAZ) version P1758
Fixed: Iveco EDC7UC31 faults read (was "error 3.5" before)
7.6.20841 23/05/2024
New:
* MAN PTM/FFR gearbox FLEET mode get/set (price 100 tokens)
* Iveco Daily EDC17C49 GPT memory operations
New (minor):
* Volvo EBS2.3 (Knorr) via DC/OBD (only info and faults operations)
* MAN EBS2.3 (Knorr) via DC/OBD (only info and faults operations)
* Connection info for EDC17CV44
* MR hardware type A8b detection added (in BSL mode only)
Fixed:
* Volvo EMS 2.3 FLASH write was fixed
* Connect to Volvo EMS 2.3
* Now we do not check Volvo truck ignition on OBD pin
7.6.20617 25/04/2024
New:
* UCV/FR (Brazil Mercedes) memory operations via DC (needs "updated" UCV/FR DC2 cable)
* Can change RPM for MBenchLite operations
New ECU versions: MD1CE101 (Iveco) version 4.5.4 (new variant) added
Changes:
* "MBench" renamed to "MBench PLD Lite"
* MBenchLite connect moved from Mercedes to ECU tab
* MBenchLite page was redesigned
Fixed:
* DC1 does not need updates
* missed DAF GS3.6 A and B variants were added to ECU tab
7.5.20238 14/02/2024
New:
* Scania COO8 JTAG memory operations
* MR in boot mode allows to make BSL memory operations without soldering/opening ECU
* IRRF, MBenchLite updates via app
* Scania EMS S7 and S8 memory operations via DC/OBD
* after reading FLASH show are checksums valid or not
New ECU versions:
* MCM2.1 diagnosis version 00201E
* EDC7UC31 (Volvo Penta) version P800
* MD1CE101 (Iveco) version 8.0.3
Changes: ACM2 and ACM2.1 now has same EEPROM size (32Kb) so we can write ACM2 to ACM2.1 hardware now
7.5.20107 18/01/2024
New: Scania EMS S7 memory operations via JTAG
New ECU versions: MCM 2.1 diag version 00221B
Changes: JTAG memory write operations are much faster now (for CPC3, CPC3 Evo)
Fixed:
* "data record version" for MCM is readed correctly now
* connect to Scania ECUs in boot mode
* "Detect control units" for Scania via OBD
* EDC7C3 write via BDM was fixed
* EDC17UC31 FLASH write for unknown versions
7.4.19836 14/11/2023
New: Scania EMS S8 memory operation via JTAG
7.4.19746 27/10/2023
New:
* "Erase emission faults" added (Action tab, needs MB_EXTRA license)
* Volvo EMS 2.2, 2.3 JTAG memory operations
* Volvo EMS 2.2 memory operations via DC (GPT mode; no connection info yet)
* Volvo EMS 2.3 memory operations via DC (GPT mode; works still unstable)
* DAF GS 3.6 BSL memory operations
New (minor): new CPC3 DC2 cable (with EvoBus support)
7.4.19527 22/09/2023
New:
* Volvo trucks (connect info for main ECUs, faults read/clear for all ECUs)
* GS 3.3 (MAN, DAF, IVECO) BSL memory operation
* Scania OPC5 memory operations via DC/OBD (needs Scania_OPC5 license)
* connect to MR in boot mode (was "error 3.5" error before)
* speed limit for Scania EMS S7 & S8 (was only for EMS S6 before)
* ECU versions: CPC2+ version 4702, FR version 04A0
Fixed:
* Iveco connect via OBD (was "error 0.3" during connection to INS)
7.3.19375 30/08/2023
What's new:
* CPC3 immo status (classic/FBS3)
* CPC3 immo system change to classic/FBS3
* GS 3.0 (ZF Astronic; Iveco) BSL memory operations
* Instrument cluster (Continental; Iveco) BSL memory operations
New ECU versions:
* CPC version 4400 (diagnosis version 47)
* MCM2.1 diagnosis version 002A1B
Fixed:
* CPC5 speed limit now works for cruise control too
* COO6, some OPC versions (Scania) detection via OBD (was not detected before)
7.2.19190 26/07/2023
What's new:
* MCM immo off
* Can easily copy last/pointed operation results with "Copy marked" after right click inside Log window
Fixed:
* BSL connect for ST10F276 (CPC & GS2 ECUs) (worked before only with 26V voltage)
* CPC hardware class detection should work ok now (added all known versions from logs)
* update of expired VEI with DC connected (was "license error")
* CPC2+ connect in BSL mode
* Scania EMS S6 speed limit write (was "error 0.3")
7.2.18980 12/06/2023
What's new:
New ECUs versions: CPC5 diagnostic version 23004, 23009
Fixed:
* TCM (Wabco) version 000C FLASH write (was "dump does not match" error)
* PTM keys information over PTM-EDC7 DC2 Y cable (was "error 3.5")
* CPC hardware class detection when CPC is in boot mode (was always "unknown")
* "Internal error" when switching between VEI devices with different Wi-Fi modes
7.2.18913 26/05/2023
New:
* WiFi can be disabled now, after that VEI can be plugged into OBD or USB in any order
* ECU versions: GPT connection for MD1CE100 from MAN (VW) Meteor
Fixed:
* CPC3/CPC5 detection (was detected as "unknown")
* Connect to Scania via OBD (was "error 0.3")
7.2.18884 19/05/2023
New:
* Mercedes UCV-FR (Brazil) BSL memory operations (needs MB_FR license)
* now it is possible to read/write EDC7C32 & EDC17 from tractors & marine in GPT mode via "ECU" tab (no dump checks/corrections are done so use it on your own risk!)
Fixed:
* MAN PTM-EDC7, FFR-EDC7 pairing (was "error 0.3")
* FR connect over OBD is more stable now (it was not detected before sometimes)
* CPC RTC write fixed (was "bad user input" error)
7.2.18834 17/05/2023
New:
* EBS3 (Wabco) DAF (EBS3 CM) JTAG memory operations
* CPC4 diagnosis version 010507 (boot) memory operations
Changes: "dataset" renamed to "hardware part number" (for all Mercedes ECUs)
Fixed:
* BSL connect for MCM2 and possible other ECUs (was "error 3.7" before)
* (Mercedes) FR hardware class 0 FLASH memory operations
7.1.18534 17/03/2023
New ECU versions:
* MAN PTM 36.25805-7022 memory operations
* Kamaz EBS3 (Wabco) diagnosis version 9010700, 9010701, 9070B00 memory operations
* EDC17CV41 (Ford Cargo) GPT memory operations (use Iveco tab)
* EDC7C3 firmware version 321
7.1.18464 08/03/2023
What's new:
new ECU versions:
* EMS2.3 (Volvo) part number 21900541
* VCM2 firmware version VCM_SW_WP8_rel3
* many FMR/FR/CPC2 versions
changes:
* do not allow TCM/MCM pairing if ECU is already paired (to avoid "error 3.5" during pairing of already paired ECU)
fixed:
* Faults clear for MP4 ECUs over DC (for some ECU versions faults were back after power off/on)
* Home page flickering without internet connection
* In some cases app crashed on startup (was "Internal error")
more Version 7.8.22152 13/03/2025
Data Not Linked to You The following data may be collected but it is not linked to your identity:
