TerraConfig 3.5.0 adds these improvements and bug fixes! Optimized guide instructions for custom OCPP server configuration to improve user experience. Optimized BLE scanning logic to be compatible with more charger models. Added ISO 15118 configuration options if the firmware of the charger is supporting. Updated the smart meter compatibility list to support the latest smart meters. Fixed other known issues.

TerraConfig 3.4.0 adds these improvements and bug fixes! Supported Austrian regulatory configuration. Optimized Eco Mix mode settings to improve solar charging efficiency. Optimized device log descriptions to improve user experience. Fixed other known issues.

TerraConfig 3.3.0 adds these improvements and bug fixes! Added user announcement feature. Added randomized delay configuration in the UK region. Optimized Modbus configuration.

TerraConfig 3.2.3 adds these improvements and bug fixes! UI optimization improves user experience. Support the configuration of new (M-series) smart meters. Bug fixes and performance improvements.

TerraConfig 3.2.2 adds these improvements! Optimize the upgrade process to improve the success rate of BLE channel upgrade for chargers.

TerraConfig 3.2.1 adds these improvements! Update server domain configuration to support operation and maintenance.

TerraConfig 3.2.0 adds these improvements and bug fixes! Added support for users to set the minimum solar current for the "Eco MIX" solar mode. Added support for users to remotely upload device log information for problem diagnosis. Added support for Lite charger model compatibility. Optimize the charging current limiting channel description. Bug fixes and performance improvements.

TerraConfig 3.1.2 adds these improvements and bug fixes! Allow users to configure a new WSS OCPP server for the charger without the Root CA. Activates cumulative meter value mode for a defined range of chargers. Addresses a bug where the firmware version wasn't refreshing after firmware updates. Bug fixes and performance improvements.

TerraConfig 3.1.0 adds these improvements and bug fixes! Ability to configure Fuxi type chargers Ability to configure Wi-Fi without password

TerraConfig 2.2.1 adds these improvements and bug fixes! Added an offline networking mode option in connectivity settings. Added a reminder to update firmware to version 1.8.2 . Added a new input function to reduce charging current via dry I/O. Added support for D11-D13 energy meters when configuring Terra AC chargers. Various other bug fixes and improvements.

Enhancements and bug fixes in the app version 2.2.0: This version supports commissioning a charger located in an underground parking garage or basement: - The installer will be able to download and manage each variant's firmware package on the app locally. - The installer will be able to prepare a charger before commissioning a charger while being offline. - The installer will be able to install a firmware package while being online and offline. - The installer will be able to install a different firmware while commissioning a charger via Bluetooth while offline. - Various other bug fixes and improvements.

Enhancements and bug fixes in the app version 2.1.3: You can lock the detachable cable in the charger with the socket.
 Fixed the bug that cannot connect after configuring 3rd party OCPP server with a password.
 Improvements in the Thai language translations.
 Improvements in the firmware update functionality.

Enhancements and bug fixes in the app version 2.1.2: Fix the imbalance setting bug of the local load management functionality. Fix the configuration stuck bug on the energy management step. Improvements of the fallback limit setting of the local load management functionality.

Enhancements and bug fixes in the app version 2.1.1: Fix the imbalance setting bug of the local load management functionality. Fix the configuration stuck bug on the energy management step. Improvements of the fallback limit setting of the local load management functionality.

Enhancements and bug fixes in the app version 2.1: This version supports the configuration of charger models that are able to use solar power: Verify the correct installation of an energy meter with a step-by-step wizard in the app. Check the solar compatibility for already installed energy meters. Update the charger to the latest firmware that supports the use of solar power. Adjust the default charge mode settings.

Enhancements and bug fixes in the app version 2.0.12: - You can now rate and provide feedback on the app. - The functionality of resetting the charger is improved. - Improvements regarding firmware updates are added. - Various other bug fixes and improvements.

Enhancements and bug fixes in the app version 2.0.11: - This update fixes the issue where the app presents possible firmware updates that are not fully suited for the connected charger.

Enhancements and bug fixes in the app version 2.0.10: - Essential firmware updates are automatically installed when upgrading a CE charger. - You can now modify the maximum amperage limit as desired by the user, besides the amperage limit of the fuse that is used for the charger circuit. - Improved connectivity on bluetooth and remote control. - Improved feedback on effect on modbus or connection settings when setting a static IP for Ethernet. - Various bugfixes and improvements.

- App support to set a static IP when connecting a charger via ethernet for supported chargers on the latest firmware. - Charger device details support to provide troubleshooting information such as channel info for isolating problems. - Charger device details support to provide configured charge point identity information in the OCPP server info. - Improvements on firmware update process. - Thai language is newly supported. - Various minor bug fixes and improvements.

Enhancements and bug fixes in the app version 2.0.8: - Improvement on Wifi password length(maximum of 63 characters) aligning with firmware version 1.6.9 - Improvement on RFID cards interoperability with charger by NFC power configuration options - Now Arabian and Bulgarian languages also supported - Improvement on custom OCPP server port number handling when it’s not part of URL input. Also, server name is removed to minimize user input field - Improvement on 4G connection configuration where username and password is optional - Fix on load management variable to provide smart meter phase and random wait time inputs - Improvement on error message indications - Couple of translations updates for the texts revised in last release (except for Croatian, Romanian and Norwegian) - Fix on intermittent connectivity problem - Minimum iOS version for the app is upgraded to iOS 15.3

We improved the app in severals domains. In general we fixed reported bugs, mainly focussing on OCPP and network settings. We also added an extra logging feature to determine communication issues more easily.

We fixed some bugs and improved general performance: - display more information in device details - fixed an issue with entering verification codes - will check if a custom OCPP url has a valid scheme - will poll every 10 seconds to check what the connection status is of the charger (Wifi, Bluetooth or 4G) - general improvements and textual changes

We fixed some bugs and improved general performance: - We added the functionality to configure the free vending on your charger. - We fixed a bug where pushing a configuration gave an occasional time out.

- We fixed a bug that prevented the charger from connecting to an external OCPP server. - You can set a custom charger identity when configuring a custom OCPP server. - Fixed a bug when connecting to a charger. - General improvements on translations.

We fixed some bugs and improved general performance.