- Fixed final exits automatically getting renamed in some situations. - Fixed evacuation target settings not being fully respected by final exits.

Fixed site plan migration card not showing in some cases

Final exits - PlanStudio now automatically places final exits on all site plan evacuation routes. - All new final exits and Assembly areas are now assigned default tags to improve the experience of the new manual final exit route editor. - For existing site plans, your existing settings are preserved and you can still place final exits manually while in Legacy mode so this change does not disrupt existing work. A warning card will prompt you to migrate to the new tooling. During migration, PlanStudio removes any invalid final exits and automatically places missing ones. - Selecting a final exit tag on a site plan lets you whitelist which floors in the building the evacuation route serves. Use Allow All for every floor, or whitelist to use only selected floors. - When selecting assembly areas, a building whitelist now lets you choose which buildings can use that assembly area. - The four existing final exit modes in the diagram editor have been simplified to Automatic and Manual: - Automatic: uses the assembly area and final exit whitelists to generate site plan evacuation paths automatically, with higher accuracy. - Manual: lets you fully customise site plan evacuation paths. You can show the whitelisted options for your building or edit all possible paths. Click an assembly area to turn on all paths to it, click a building to turn on all paths from it, or click a final exit to control each evacuation route individually. Each route can be set to: - [P] Primary path - [S] Secondary path - [X] Off - [C] Closest route to an assembly area - Final exit settings can now be cloned in the diagram editor. Icons and layouts - You can now hide individual icons on diagrams. - Click an Assembly area, Fixed, Zoned, or Leader line icon to select it. - In the Tool Settings panel, click the eye icon to hide or unhide the selected icon(s). - Hidden icons appear blue while in the layout editor. - Updated icon layouts. - Icon layouts are now edited by clicking the icon group to rotate it, while the leader line angle is set by dragging the icon into position using the new snapping settings in the tool panel. - When changing leader line angle, a new guide shows what the leader line snaps to. You can edit the available angles, the leader line length, and the guide opacity in advanced settings. - Length snapping: snaps icons to multiples of a set distance around the leader line dot. - Angle snapping: snap icons to set angles around the leader line dot. - Icon alignment: snap icons in line with other icons on your plan using the blue guide lines. Adornments - The pink plus button has been removed. Adornments are now added with the new Add Adornments button in the tool panel. - You can now import photos from the plan as adornments. - Added adornment types for lines, arrows, and basic shapes. - Added a copy and paste clipboard for adornments. General - The Export tab now lets you bulk-export photos from any plan in the current campus. - You can now manually reorder floors in a building, from both the plans panel and the plan manager. - The orientation setting on diagrams now reflects which templates are available to choose from. If a diagram's orientation does not match its template, PlanStudio shows an error in the sign preview panel. - You can now add standalone north symbols in diagram templates outside the plan and site plan areas. - Common and tenanted zones no longer impact footprints on the site plan. - Panels can now be resized by dragging the edge. Double-click to restore a panel to its original size. - The cross-street address is now auto-filled when adding a buildings to a campus. - Exit signs can now be theme-tagged. - Evacuation diagrams with a YAH (You Are Here) are now automatically framed so the YAH is always visible by default. - Assembly Areas and Fixed Icons can now be hidden through the Layout Overrides. - Solved an issue causing some icons to render as a black box.

- Fixed bug where some icons were not rendering properly. - Fixed issues with the diagrams tab and saving multiple PDF's.

Features - A new tool has been added to the Diagram Editor for overriding diagram content. - When active, overridable content is shown in orange boxes. - Clicking on a box will select the content, allowing you to provide your own value in the Tool Settings panel. - Currently, both text and image content can be overridden. - Added options to override the Theme and Network Library in the diagram inspector. - Icons can now be identified by another icon in a diagram's legend. - In the Icon Library Editor, use the "legend uses icon" field to select another icon. - The selected icon will now appear in the legend instead of the original icon. - Multiple icons can share the same icon in the legend. - Improved the loading time of the diagrams list. - Removed redundant properties from the diagram inspector. - Added hotkey tooltips to sub-tools and panels. - Improved room label selection. - Copy-pasting a group of icons now retains their order. - Unknown icons or networks no longer show on diagrams. - General UI enhancements. Bug fixes - Fixed a crash when exporting a new template. - Fixed a crash when attempting to enable a background plan using the Plans Panel while not having an internet connection. - Fixed some icons rendering as black boxes. - Fixed doors and openings not respecting a transparent theme.

- Fixed clipboard manager - Fixed room selection

New Features - Updated Exporting - Added a new Exporting tab to the Plan and Diagram Editor, making it easy to bulk export diagrams and data for your whole campus. - Diagrams: Bulk publish evacuation diagrams. - Block Plans: Bulk publish block plans. - Data: Bulk export plans data in CSV, Export various image types and DXF files. - These exporting options are also available in the Plan Manager. - Hotkey Overhaul - Updated the Hotkey UI so Hotkeys are now organised into tabs and sorted by context for improved usability: - Global: Available across multiple areas of the application. - Plan Editor: Available only within the Plan Editor. - Diagram Editor: Available only within the Diagram Editor. - Expanded the configurable hotkeys to include additional tool modes, panels, toggling settings, and tab switching. - Publishing & Sign History Improvements - Updating a sign reference on a diagram now preserves the diagram’s publish history. - Creating a sign using a previously deleted sign reference will inherit the original sign’s history. General Improvements - Added a default Emergency Phone field to the diagram template editor (defaults to 000). - If no emergency number is set in diagram content, this value will be used during publishing. - Updates to Tool Bar UI - Improved the position and alignment of icons in the toolbar for better consistency. - The Diagram editor toolbar now Highlights selected tool for a more consistent experience. - Framing and margin tools in the Diagram Editor have been combined into a single tool. - The Theme Editor now supports secondary colours for stairs. - Zoned icons now scale down when zooming out, consistent with leaderline icon behaviour. - Room labels now appear over building footprints on site plans. - Improved translations; Mandarin characters now publish correctly on diagrams. - Image annotations containing GPS data are no longer placed automatically. - Location placement can now be triggered manually using the new Pin button in the photo inspector. - Stability and performance improvements across the application. Bug Fixes - Fixed an issue where photo annotations were placed incorrectly on certain components. - Resolved an issue where the visibility toggle in the Browser Panel did not work for individual network components. - Fixed an issue to prevent AA’s from being added to floor plans and being used as evacuation targets - Fixed an issue causing YouTube videos to not play on iOS.

Features Diagram Editor Page - Added tabs to switch between the Plan Editor and Diagram Editor. - Introduced new dockable panels to the Diagram Editor for a more consistent editing experience. - The Diagrams Panel now shows all diagrams sorted by type and supports renaming and deleting diagrams as well as creating standalone diagrams. - The Plans Panel allows quick navigation between buildings and floors in a campus. - Updated UI colour scheme and improved overall visual consistency. - The lower section of the diagram preview canvas is no longer cropping contents. - Renamed "Publish with watermark" to "Publish draft" to better reflect its purpose. MetroMap Layer Improvements - Improved handling of available imagery to reduce missing or invalid map layers. - Added warning messages to help resolve issues when satellite imagery becomes unavailable. Other Features - Updated the roller door inspector and added support for data fields. - Improved overall stability, including fixes for flickering UI elements. Bug Fixes - The "hide unassigned icons" preference no longer hides core icons. - Fixed the room label title-case button for multi-line text.

Introduced Room Mode to automatically generate rooms on plans and enter in the text labels. - Room labels are now generated by reading text directly from the underlying graphics or annotations. - Optional toggle to generate rooms for all enclosed spaces where labels aren’t detected. Enabling this option will add additional rooms and use auto-generated labels, allowing for quick bulk room creation even when no text is available. Improved navmesh generation for cleaner results. - Lines no longer need to pass exactly through door centres. - Navmesh lines are no longer created through windows or run through wall blobs. Walls generated using the Trace Tool Wall Mode now snap to 90 degrees when using heavy cleanup, this should result in a big improvement to the usable walls the Trace tool generates and cut down the time required to ‘fix’ the automated walls. We have added a new option to the Walls paint mode, You can now choose to preserve the existing wall preset or fire rating when applying changes using the wall brush. New option to convert room labels to uppercase or title case. Adding a photo with GPS EXIF data will automatically reposition the photo annotation pin to the correct latitude/longitude on your plan. All colour pickers now include a transparency slider. Various stability improvements across the platform. Bug Fixes - Fixed an occasional crash when using Trace Tool Navigation Mode. - Fixed block plan legends not accounting for identified zone categories in all visible plans. - Improved German translations.

Features - Trace Tool - Added a Zone Mode - PlanStudio can now detect bounding walls in a plan and automatically fill the building with an interior zone. - Added an optional toggle to automatically convert outline walls into external walls, saving time when using AI. - You can now import PKF files faster by dragging and dropping them directly into the plan editor, or by using the “Import .PKF File” option in the settings gear of your Plan Editor. - Partner Admins and Content Admins now have an additional way they can view a plan’s history. - Improvements to the Plans Panel user experience. - Overall stability improvements of PlanStudio. - Improved German translations. Bugfixes - Fixed crash when exiting the Plan Editor. - Fixed crash on the siteplan when managing building footprints. - Fixed favourite icon manager button sometimes failing to open the dialog when clicked. - Improved German translations.

New Features - Trace Tool - Added a Navigation Mode - PlanStudio can now analyse the walls and doors on a plan and automatically generate a navigation mesh (navmesh), enabling faster & better pathfinding capabilities. - The Trace Tool's Wall Mode now detects walls more reliably, including walls with no connections on either end. - Wall Tool – Paint Mode Enhancements - In addition to setting fire/smoke ratings, you can now change the preset wall type (e.g., Internal, External, Cubicle, etc.) directly in Paint Mode. - Use Brush Mode to highlight the walls you want to edit. You can add or remove walls from the selection as needed, then confirm to apply changes to all selected walls at once. - Icon Creation Improvements - Icon types are now treated as equivalent regardless of case (e.g., "exit" and "Exit" are no longer treated as different icons). - Existing duplicate icon types will now be automatically resolved. They will either be: Renamed to match the icon's name, Removed if redundant, Numbered to distinguish between duplicates. - Accounts affected by naming conflicts will have been contacted by Locatrix in advance to assist with resolution. This change does not affect any existing plans. - Improved editor stability. - Security enhancements. Bugfixes - Fixed an issue where evac target nodes placed on the navmesh would occasionally disappear. - Resolved a bug causing primary evac paths to incorrectly route through portals.

- Added a search filter to the browser panel. Items can be filtered by name or icon type. - Zone tool improvements: - Added a circle mode to the zone tool. - Added a circle and brush mode to the zoned icon tool. - Creating a new zone using the rectangle or circle mode now displays the dimensions. - The trace tool now detect existing walls on the plan and avoids duplicating these during tracing. - Opening the plans panel now shows the current plan by default. - Improved reliability of services. Bug fixes - Fixed floor plan margins not applying to site plans shown in the background. - Fixed diagrams with manual evac targets showing blank checkboxes.

Improved stability of the Tracing Tool on iPads.

Trace with AI - The Trace Tool can be used to scan and automatically draw in all the walls from any type of graphic uploaded into PlanStudio. - The tool supports a wide range of floor plan graphics, including photos of existing evacuation signs, detailed CAD plans, and even hand-drawn sketches. It can also handle multiple stitched-together graphics, so you can import several sheets of a larger plan, arrange them, and let the AI trace everything in one seamless floor plan. - The Trace AI tool can detect annotations created with the Pen Tool in PlanStudio. These annotations can be used to hide or mask objects you want the AI to ignore, or to draw additional lines for the AI to recognize and trace. - Sensitivity Slider: Adjust the sensitivity of the AI to different lines and objects. Depending on the type of plan you're working with, you can experiment with different sensitivity settings to achieve optimal results. - Cleanup Options: A dropdown menu that controls how PlanStudio tidies up automated walls. It allows you to fine-tune the wall generation by how aggressively walls will be joined and straightened. New Grid Lines Feature - The previous grid layer has been replaced with a new, more versatile grid component. - You can now easily add multiple grids to a plan using the "Pink + Button". - Once you select a grid from the browser panel, you can customise the grid spacing and rotation in the inspector panel, then drag the grid on the plan to adjust its position. - A new "snap to grid" option has been added to the snapping panel. - Grids can now be styled and customised in the theme library editor. Updates To Template Creation - You can now specify the number of icon columns to use in the vertical legend mode within the diagram template editor. Previously, this was adjusted automatically based on the legend's needs, but now you have full control to set the number of columns. - A new option has been added to set the minimum icon height for legend items in the diagram template editor. When configured to shrink, icons will stop shrinking once they reach the specified minimum height. Changed Campus Creation - The "+ Button" in the plan manager has been replaced with more intuitive text buttons for creating new clients, campuses, buildings, and floors. - When creating a new campus, you will now be automatically prompted to set up your site plan. Once completed, PlanStudio will send you into a new floor plan with the site plan layer shown. - We’ve added a dialog box for quick and easy editing of campus, building, and floor details immediately after creating a new campus. Updates to the Plans Panel - The Plans panel now includes controls for adding new buildings and floor plans directly from the plan editor. - From the plans panel you can now easily edit the names of campuses, buildings, and floors, as well as update addresses for campuses and buildings. We've also added the ability to delete buildings and floors. - Additional updates have been made to make it easier for users to see the current building they are working in, know which plans are the primary plan and which are visible as an underlay, and some visual updates to make the panel overall more intuitive and consistent with other parts of PlanStudio. Other Features - To complement the AI Trace Tool, a manipulation sub-mode has been added to the Wall Tool that allows wall nodes to be dragged and adjusted more easily. - Building footprints on the site plan now support multiple detached interior zones. - Improved German language support. - Security improvements. - The diagram publisher and draft publisher roles are now granted the same permissions as the Partner User role on top of the existing publishing permissions. Bug Fixes - Fixed walls not snapping correctly in some cases. - Fixed crash when attempting to quick-frame block plans without geotags. - Fixed some core icons not respecting icon filters. t

Hotfix for an issue that prevented desktop versions of PlanStudio from opening plans edited with the iPadOS version of PlanStudio.

Trace with AI - The Trace Tool can be used to scan and automatically draw in all the walls from any type of graphic uploaded into PlanStudio. - The tool supports a wide range of floor plan graphics, including photos of existing evacuation signs, detailed CAD plans, and even hand-drawn sketches. It can also handle multiple stitched-together graphics, so you can import several sheets of a larger plan, arrange them, and let the AI trace everything in one seamless floor plan. - The Trace AI tool can detect annotations created with the Pen Tool in PlanStudio. These annotations can be used to hide or mask objects you want the AI to ignore, or to draw additional lines for the AI to recognize and trace. - Sensitivity Slider: Adjust the sensitivity of the AI to different lines and objects. Depending on the type of plan you're working with, you can experiment with different sensitivity settings to achieve optimal results. - Cleanup Options: A dropdown menu that controls how PlanStudio tidies up automated walls. It allows you to fine-tune the wall generation by how aggressively walls will be joined and straightened. New Grid Lines Feature - The previous grid layer has been replaced with a new, more versatile grid component. - You can now easily add multiple grids to a plan using the "Pink + Button". - Once you select a grid from the browser panel, you can customise the grid spacing and rotation in the inspector panel, then drag the grid on the plan to adjust its position. - A new "snap to grid" option has been added to the snapping panel. - Grids can now be styled and customised in the theme library editor. Updates To Template Creation - You can now specify the number of icon columns to use in the vertical legend mode within the diagram template editor. Previously, this was adjusted automatically based on the legend's needs, but now you have full control to set the number of columns. - A new option has been added to set the minimum icon height for legend items in the diagram template editor. When configured to shrink, icons will stop shrinking once they reach the specified minimum height. Changed Campus Creation - The "+ Button" in the plan manager has been replaced with more intuitive text buttons for creating new clients, campuses, buildings, and floors. - When creating a new campus, you will now be automatically prompted to set up your site plan. Once completed, PlanStudio will send you into a new floor plan with the site plan layer shown. - We’ve added a dialog box for quick and easy editing of campus, building, and floor details immediately after creating a new campus. Updates to the Plans Panel - The Plans panel now includes controls for adding new buildings and floor plans directly from the plan editor. - From the plans panel you can now easily edit the names of campuses, buildings, and floors, as well as update addresses for campuses and buildings. We've also added the ability to delete buildings and floors. - Additional updates have been made to make it easier for users to see the current building they are working in, know which plans are the primary plan and which are visible as an underlay, and some visual updates to make the panel overall more intuitive and consistent with other parts of PlanStudio. Other Features - To complement the AI Trace Tool, a manipulation sub-mode has been added to the Wall Tool that allows wall nodes to be dragged and adjusted more easily. - Building footprints on the site plan now support multiple detached interior zones. - Improved German language support. - Security improvements. - The diagram publisher and draft publisher roles are now granted the same permissions as the Partner User role on top of the existing publishing permissions. Bug Fixes - Fixed walls not snapping correctly in some cases. - Fixed crash when attempting to quick-frame block plans without geotags. - Fixed some core icons not respecting icon filters.

Improved translations.

Features: - Create Zone Block Plans & show multiple plans on a single diagram. - There is a new dropdown in the Diagram Template editor for setting the Diagram Type. - When in the Diagram Preview, additional floor plans can be added to your Block Plan enabled diagrams using the +ADD FLOOR PLAN option. - Plans can quickly be laid out in a grid using the Quick Framing option in the framing tab of the diagram preview. - You can toggle Keep Position and Zoom Aligned ensuring the position and scale of all plans matches the active plan. - All Alarm zones will now be combined into a single legend item that now shows the long name of the zones. - Note: Adding additional floors to a diagram can incur additional publish fees, for more information talk to your account manager. - Added a new Modular exit sign type. - A new Modular type of Exit sign has been added as an option under Appearance in the Theme Library. - The default Modular Exit sign icon and Arrow can be replaced in the Icon Library. - When using a Modular Exit sign, you can configure the direction of the Exit sign (Running Person), up to 8 arrows can be toggled on or off, and each arrow can be custom rotated to achieve any desired layout. - Added a language selection in the Preferences menu. - PlanStudio now offers the selection between English and German. - Currently, this feature is in beta, and some translations may be incomplete. - Added dropdown menu for quick-switching between partnerships if the partner list is small. - Floor footprints can now be refreshed individually in the site tool. - The outline colour of grouped leaderline icons now uses the colour of first icon. - Removed the private zone layer toggle from the diagram template editor. Private zones should be managed directly on the diagram's Security settings. - The read-only toolbar now shows in the Adjust Satellite screen. - Improved the evacuation path generation. - Improved reliability of importing PDFs. - Improved handling of long text in the Plan Manager. - Improved dark mode. - Improved stability. Bug fixes: - Fixed leader line icon source point resetting in the sign preview. - Fixed networks not being clickable in some cases. - Fixed diagram legend showing incorrect icons. - Fixed satellite tiles sometimes not showing. - Fixed numerous other visual bugs.

- Added the ability to show the arrow tail in the diagram legend for custom evacuation path icons. This feature can be enabled via the diagram template's legend settings. - The default evacuation path icons in the legend now respect the diagram's evacuation path theme colour. - Fixed evacuation path arrows not being centred on the evacuation paths.

- Added door locks for restricting evacuation paths from passing through a door - Similar to portals, door locks can apply either to only one direction, or both - As part of this change, the Portal layer has been renamed to Door Controls, and it now controls the visibility of both portals and door locks - Leader line targets of alarm zone icons can now be customised on the sign preview - Added the ability to customise evac path arrows - The icon can be edited in the Icon Library editor - The partner/client library selections now show the name of the default libraries - Improved accuracy of the sign preview in PlanStudio - Improved performance of the sign preview - Removed warning when editing a plan without geotags - Improvements to dark mode - Fixed evacuation targets having their mode reset in some cases - Fixed images in the Plan Managers breaking when PlanStudio is left open for a period of time - Fixed client default settings failing to save in rare cases

New features - Added the ability to limit users' access to campuses by assigning them to User Groups. Through the account management page you can add and remove users to groups and set which campuses these User Groups have access to. - All users are added automatically to the Everyone group. By default, the Everyone group has access to all campuses. - When new groups are created, you can invite users into a group and select which campuses the group has access to. All unassigned campuses cannot be seen or edited by users in the group. - Users can be part of multiple groups, and group permissions are stackable: If a user is part of a group that grants them access to Campus A, and are a member of another group that grants them access to Campus B, they will have access to both Campus A and B. - Once the custom User Groups have been created, the partner admin should modify the access of the Everyone group to "no campuses" so that the custom groups can come into effect. - If a user is part of a group that grants them access to "all campuses", they will be able to see all and create new campuses. - If a user is only part of groups that grant them access to specific campuses, they will not be able to create new campuses by default. You can override this behaviour by checking the "allow adding new campuses in PlanStudio" box - if checked, any new campuses created by a user within this group will automatically be added to that group and all other users of this group will have access to the new campus as well. - Unless a user is part of an "all campuses" group, empty clients will be hidden in PlanStudio. - All Admin roles have access to all campuses, regardless of the groups they are part of. - Leader line widths are now customisable via themes. - Improved snapping of walls. - Improved UI when importing georeferenced images. - Improved appearance of the status indicator context menu. - Improved stability. - Small UI fixes. - Security improvements. Bug fixes - Fixed manual evac target settings on signs resetting in some cases.

Features: - Added a new feature that allows you to manually configure all evacuation paths per diagram via the new evacuation targets mode. There are two modes to choose from. - Automatic: PlanStudio automatically chooses the primary path and allows you to manually enable/disable secondary paths (existing behaviour). - Manual: You can manually set each evac path to be a primary path, secondary path, or disabled, regardless of the distance to a target. You get full control over the evacuation path types, without having to manipulate targets or evacuation path rules. Click on a target's overlay to toggle the path type - PlanStudio now supports mutliple users on the same device. - Each user's settings, unsynced plans, and offline data are kept separate. - When starting up the new version for the first time, PlanStudio will perform a data migration in the background. In the majority of cases this process will be smooth, however, please contact Locatrix if you encounter any issues. - Extended image importing/exporting support. - A new setting "Export Snapshot" has been added to the plan editor settings menu. - Take a snapshot of your current view and export it as SVG, JPEG, or TIFF format, with the option to georeference the JPEG and TIFF images. - PlanStudio now supports importing georeferenced TIFF files. - Identified zones can now be ordered. Note that the display order of sortable items in the browser panel has been inverted as part of this change: the top item of the list will now correspond to the top-most component in the plan. - Added a new data field type for URLs. - Notes now parse urls and display them as clickable links underneath the note. - While editing plans, unassigned icons can now be hidden via a new setting in the preferences menu. - Enhanced performance when manipulating fixtures. - Improved backup reliability of large plans in case PlanStudio comes across an unknown error while syncing. - Improved accuracy of the text hitboxes in the diagram override editor. - Improved stability of PlanStudio. - Improved accuracy of the status indicator. - Improved security. Bug fixes: - Fixed a crash when typing ".core" into the icon search box. - Fixed a crash when resizing the window while in the Adjust Satellite view.

Fixed scrollbar on floating panels not showing for some users

Fixed a crash in the plan manager

New Features - Improved evacuation pathfinding to choose more sensible paths. - Deleted plans are now cleared from the quick-access menu. - The satellite layer no longer shows on floorplan snapshots. - Improved overall stability of PlanStudio. - Added various minor UI enhancements. Bugfixes - Fixed path labels not rotating correctly. - Fixed metadata label not showing in the metadata theme preview. - Fixed a crash when previewing a sign in an empty plan. - Fixed numerous UI bugs and inconsistencies.