myAVSAlarm
Utilities
Free
The APP of AVS Electronics that allows you to manage your burglar alarm system and receive real-time push notifications on the status of the system.
Complete management of the Xtream, Raptor, Capture and Ultra system:
• Sectors ON-OFF;
• Domotic Controls;
• Control and Zones management;
• Diagnostics;
• Reading Event Logs;
• Receive notifications Alarm, On-Off, Faults System, Access;
• Creating custom scenarios;
• Video verification with compatible ONVIF® cameras;
• Video verification with compatible MJPEG® cameras;
• Integration with Google and Alexa Assistant;
Everything is managed by the infrastructure Cloud myAVSAlarm that enables simplified configuration of network settings without the need to perform configurations on the router without ask to your provider one static IP address.
NB. Considering the countless number of products available on the market and the rate of evolution of products, the characteristics of the cameras and the proposed protocols are only indicative and not binding on the actual compatibility with the App. Try before you install.
more In this version, we fixed an issue that, after a fresh installation, could prevent the immediate display of systems associated with the account.
We also improved the reliability of VoIP communications and the overall stability of the app.
1.6.18 1 Aug
New Features
Video Door Entry:
• Support for the new video door entry system with audio and video calls via VoIP.
• Customization of O.C. commands for the video door entry system.
Thermal Zones
• Management of minimum and maximum setpoint limits. Introduction of haptic feedback for temperature controls and vertical sliders.
• Alarm Memory: Ability to clear the alarm memory.
• System Reordering: Reordering of Home systems.
• Password Recovery: Password recovery functionality.
Optimizations
• Improved information available in diagnostics.
• Compatibility with iOS 26.
• Internal optimizations and performance improvements.
1.6.17 6 Jul
Improved video management, advanced support for Ultra series, and thermal precision fixes.
1.6.16 9 Apr
Improved battery and sensor handling (more accurate calculations and fault/restore events), optimized video snapshots and video-related notifications, and fixed a temperature rounding issue at the next time-slot change.
1.6.15 9 Jan
In this version, the app is even more reliable thanks to the introduction of new critical alarm notifications, which ensure you receive alerts even when your device is in Silent or Do Not Disturb mode. We have also optimized various internal processes, improving overall stability and performance. Finally, support for Ultra control centers has been further enhanced to provide you with an even smoother and more continuous user experience.
1.6.14 30/05/2025
In this version, the app is even more reliable thanks to the introduction of new critical alarm notifications, which ensure you receive alerts even when your device is in Silent or Do Not Disturb mode. We have also optimized various internal processes, improving overall stability and performance. Finally, support for Ultra control centers has been further enhanced to provide you with an even smoother and more continuous user experience.
1.6.13 20/05/2025
In this update we have introduced significant improvements to the App and added some new features including:
- The possibility to customize the name of the arming mode
- Management of the Program Timer and Access User Codes
- The integration of Dahua Video Verification and Provision (only for ULTRA control panels)
1.6.12 04/12/2024
In this update we have introduced significant improvements to the App and added some new features including:
- The possibility to customize the name of the arming mode
- Management of the Program Timer and Access User Codes
- The integration of Dahua Video Verification and Provision (only for ULTRA control panels)
1.6.11 22/11/2024
In this update we have introduced significant improvements to the App and added some new features including:
- The possibility to customize the name of the arming mode
- Management of the Program Timer and Access User Codes
- The integration of Dahua Video Verification and Provision (only for ULTRA control panels)
1.6.10 21/11/2024
In this new version, we have completely revamped the look of the application, new colors and icons at your disposal.
Some minor functions have been optimized and compatibility has been extended to the new Ultra control panel.
1.6.9 31/01/2024
In this new version, we have completely revamped the look of the application, new colors and icons at your disposal.
Some minor functions have been optimized and compatibility has been extended to the new Ultra control panel.
1.6.8 11/01/2024
Now you can view the total consumption reports in the Load Control with a convenient right/left swipe on the report line. Discover the data for Today, Yesterday, Current Week and Previous Week.
New Previous Day and Previous Week reports have been added to the MDC200 module detail page.
In the Settings section, an option has been added to enable zone status control in the Diagnostic page for better management of your system.
Keep track of your environment's energy consumption (with MDC200 modules) by activating personalized notifications directly from the app, to always be informed about consumption changes.
1.6.6 03/05/2023
In this version we have improved the Diagnostics page which will now display the list of Radio Zones with low or low battery.
1.6.5 19/04/2023
In this version we have improved the Diagnostics page which will now display the list of Radio Zones with low or low battery.
1.6.4 18/04/2023
In this release, we have made some graphical improvements for thermal zones and for displaying system power consumption if the MDC 200 is installed.
We have increased the number of thermal zones that can be managed by the APP.
1.6.3 09/03/2023
In this release, we have made some graphical improvements for thermal zones and for displaying system power consumption if the MDC 200 is installed.
We have increased the number of thermal zones that can be managed by the APP.
1.6.2 10/02/2023
In this version we have added graphs for thermal zones, new visualizations for smart home modules and we’ve fixed a problem during the creation of Quick Action.
1.6.1 13/12/2022
In this version we have added support for the MDC 200 home automation modules for reading the energy consumption of your system.
This is a great feature, especially right now, to analyze electricity consumption and help you limit your spending.
We have also extended the functionality of the chronothermostat which can now manage more environments.
We have improved the management page for sector arming. Now the App lists the zones that prevent arming.
In addition, if your user allows it, you can view and reset the alarms and tampers that block sector arming.
These new opportunities are available if the control panel and its accessories are updated to the latest firmware versions.
The new App is compatible with iPhone 14 Pro and Pro Max.
1.6.0 27/10/2022
In this release we have added support for smart home modules, the chronothermostat and load control.
1.5.19 08/04/2022
In this release we have added support for smart home modules, the chronothermostat and load control.
1.5.18 11/02/2022
In this release we have added support for smart home modules, the chronothermostat and load control.
1.5.16 07/02/2022
Some internal improvements have been made in this version.
1.5.15 19/05/2021
In this version we have:
• Added the functionality of copying the settings between the master user and invitations;
• Enabled continuous playback of video recordings;
• Fixed some display issues on iPhone 12 and iPhone 12 Pro Max.
1.5.14 30/04/2021
Optimized management of ONVIF cameras.
1.5.13 08/04/2021
In this version we have made some internal improvements:
• The "Enable remote programming" activation has also been unlocked for XTREAM and Capture control panels.
• Indication of the date / time when the control unit disconnected.
• Quick replacement procedure for user-associated devices.
• Alarm notifications with zone detail.
• Quick access button to the Quick Actions panel.
• Configuration of video verification with the possibility of choosing which ONVIF profile to use.
1.5.12 02/03/2021
In this version, we fixed an issue that, after a fresh installation, could prevent the immediate display of systems associated with the account.
We also improved the reliability of VoIP communications and the overall stability of the app.
more Version 1.6.18 1 Aug
Data Linked to You The following data may be collected and linked to your identity:
Contact Info Identifiers Usage Data 