moneo|blue classic
Parameterize & visualize data
Free
With the ifm moneo|blue app you can wirelessly connect to ifm IO-Link Masters (FW > V2.1) via the ifm inline and multi-Bluetooth Adapters (Art.Nr E30446 and EIO330), read IO-Link Process Data, Diagnostic Events, and Device Information from any IO-Link device. You communicate with the IO-Link devices without needing a PLC. You can set parameters of the IO-Link device (only with the ifm multi-plug Art.Nr:EIO330)via the App as well. Wizard-guided and graphically supported parameterisation of special ifm sensors (TCC, MVQ101, TN2105, LR2xxx) with the EIO330. Cross-manufacturer parameterisation possible, display and record of the process data.
more - The app did not write the LRP file for some non ifm sensor. Now the app will write the LRP file even if the sensor has some parameter without values, so called Null value.
- The app displayed an error for some non-ifm sensors because these sensors do have different structure in the IODD. Now the app can also handle such IODDs.
- The countries whitelist was extended to all countries according to the Bluetooth certification for the adapters.
1.8.3 31/10/2025
Bug Fixed
- The app crashed while writing network parameters for some AL-masters. This was true in case of DHCP parameter is not there. Now the network parameters are processed correctly according to availability of the parameters.
1.8.1 11/07/2025
Corrections for the validation of network settings (DHCP, subnet mask, IP, default gateway) and improved the error messages for the network settings. Fixed one bug when writing network settings to the master AL135x.
1.8.0 03/06/2025
Bug fixes
- The app crashed when user is waiting for more than 2 minutes on the pairing popup without action.
- If user goes repeatedly taps on a tile in the base station overview then the “Reading parameters from devices” popup appears and the progress bar got stuck.
- If user is on the Diagnosis screen of an IO-Link device which is connected to an Multi adapter and the user performs "Read from device" then the values changed to 0. Now the correct values are shown.
Performance enhancements:
- Download of recordings was too slow and was accelerated. Actual increase in download speed depends on the smartphone.
1.7.8 20/11/2024
Bug fixes
1.7.3 29/07/2024
Bug fixes
1.7.2 25/06/2024
- Now moneo|blue is renamed as moneo|blue classic
- Announcement of new moneo|blue app when connecting to ifm mesh devices
- Demo Mode - User can experience monoe|blue classic without any hardware setup
- Importing LRP File Functionality
- Updating Mesh Adapter firmware through Base station
- Firmware Update check for Base station and Mesh Adapter while connecting to it
- MK5xxx teach functionality changes
- Bug fixes
1.7.1 17/04/2024
New Feature
* Support DataStorage feature of IO-Link devices
* User are able to update the firmware of Base Station and Mesh Adapter
Bug Fixes
* Optimization for Cockpit and Parametrization screens
* Cache mechanism implemented to improve speed of displaying the parameter screens
* Improve support for MK5xxx sensor graphically
* MQTT parameter can be parametrized for Base Station
1.6.1 07/02/2024
* Optimization and performance changes for Cockpit and Parametrization screens
* Cache mechanism implemented i.e., when you go to cockpit screen second time without disconnecting any ifm Bluetooth Adapter, then it will read data from cache and navigation will be faster.
* Support Request are resolved
* User Acceptance Test findings are resolved
* Support for MK5xxx sensor graphically
* MQTT parameter can be parametrize for Base Station
* Bluetooth Mesh Functionality improvements and Bug fixes
* User can be able to update the firmware of Base Station and Mesh Adapter through moneo|blue app
1.6 04/08/2023
- Implemented Bluetooth Mesh Functionality
- Supporting two new Bluetooth devices i.e. ifm Base Station & ifm Mesh Adapter
- App can able to provision and un-provision the Mesh Adapter with Base Station
- Connect to Base Station and get an glance of 50 IO-Link sensor process values & configure basic attribute of Base Station
- App can now able to parametrize 50 io-link sensor by connecting to Base Station (one sensor at a time)
- App can now able to parametrize single sensor by connecting to an Mesh Adapter
- Bug fixes for ifm Multi & Inline Adapter Feature
1.5 03/03/2023
- Bug Fixes
- DTI(RFID) Sensor Manual Read & Write Data is functional now.
- Generic PDOut Functionality to change PDout Data of any sensor.
- Visual Signal Strength of ifm Bluetooth Adapter on scanning screen.
1.4.9 02/09/2022
Bug fixes
1.4.8 23/05/2022
1. LW2720 & MVQ201 device has now graphical representation
2. Showing Recording Status symbol for individual device on Master Overview Screen
3. Now the recorded data have an in-app viewer to view the process data in an chart format which also has zoom functionality
4. Events screen has been redesigned in cards style
5. Generic device dashboard now include charts which has zoom functionality
6. Now showing Bluetooth disclaimer popup based on country available radio certificate.
7. Redesigned the signal graphics for VVB device i.e. VVB001 Status A as well as Status B
8. Export of parameter is availed in floating button options on cockpit or dashboard screen
1.4 19/04/2022
- Bug Fixes
1.2.1 03/11/2021
- Added Cancel functionality while Reading the Parameter of the sensor
- Export LRP Files i.e. Parameterization files from any sensor - Quick Sharing option is available after exporting LRP file
- Graphical and JSON Architecture Support of VVB001 Status A and Status B Sensor
- Generic Blob Extract functionality is available
- Added Breadcrumb Navigation - User can quickly jump from one sensor to another
- Generic Dashboard for generic sensor will have chart
- Added Floating button for doing quick action like read or write
- Now Storage Data Page will consist of recorded files, parametrization files (LRP) and Blob Files.
- Graphical and JSON Architecture Support for DTI231 sensor
1.2 09/09/2021
* Graphical or JSON Architecture support for sensor TN2105, LR2050 and LR2750
* Redesign or JSON Architecture support for sensor MVQ101 and TCC231
* Tablet Support
* AL Master Basic Network Parameterization
* Blink Functionality for AL Master
* Now support of Block Parameterization for sensor support it
* All Recorded File will be merged into an single Zip file
* Clever refresh for Master Overview page
* In built firmware update for Multi Adapter whose version is less than or equal to 0.19
* Battery Consumption Optimization
* Bug Fixes for last store release
1.0.5 01/05/2021
* Graphical or JSON Architecture support for sensor TN2105, LR2050 and LR2750
* Redesign or JSON Architecture support for sensor MVQ101 and TCC231
* Tablet Support
* AL Master Basic Network Parameterization
* Blink Functionality for AL Master
* Now support of Block Parameterization for sensor support it
* All Recorded File will be merged into an single Zip file
* Clever refresh for Master Overview page
* In built firmware update for Multi Adapter whose version is less than or equal to 0.19
* Battery Consumption Optimization
* Bug Fixes for last store release
1.0.4 14/04/2021
- The app did not write the LRP file for some non ifm sensor. Now the app will write the LRP file even if the sensor has some parameter without values, so called Null value.
- The app displayed an error for some non-ifm sensors because these sensors do have different structure in the IODD. Now the app can also handle such IODDs.
- The countries whitelist was extended to all countries according to the Bluetooth certification for the adapters.
more Version 1.8.3 31/10/2025
Data Not Linked to You The following data may be collected but it is not linked to your identity:
Location User Content Diagnostics 