Fixed minor bugs

- Improved compatibility for iPadOS18

Bug Fix: Tabs at the bottom of the RACK screen were incorrectly displayed. Bug Fix: HPF handle was incorrectly displayed as LP in the output EQ window. Bug Fix: “Send Main” assignment in custom fader layers was incorrectly displayed as ‘SEL CH’. Bug Fix: The background color of the Input/Output Port Patch view and the DCA assignment view was incorrect.

Added compatibility with CL firmware V5.80. Bug Fix: The CH Name could not be set correctly when it was set to 2 characters or less. Bug Fix: When copying an A/B linked 8 Band EQ and pasting it into another 8 Band EQ that is not linked, the A/B settings are the same.

- Added 'Hide Unused' Mixes Mode to Sends on Fader and Channel Mix Sends Views. When enabled, only contributing Mix Send faders will be displayed and the non-contributing Mix Send faders are hidden fro view. - Minor bug fixes and improvements - Improved compatibility for iOS14

Graphical changes for compatibility with new iPad models. Added RF control and monitoring for all RF devices that are currently supported by CL. Added GEQ/PEQ8 library store and recall. Added ’Disconnect and Return to Start Menu’ in the Setup view. Added simulated metering in demo mode. (activate via Setup menu) Minor bug fixes and improvements.

• Fixed a bug which may cause StageMix to unexpectedly close when editing channel gain parameters in custom fader layers.

• Adds compatibility with CL firmware V5.1 (please note, this version of CL StageMix is not compatible with any CL firmware version earlier than V4.0). • New tab based navigation for channel editor views • New ‘SENDS’ view for input and output channels • New ‘CHANNEL’ view, with HA, DCA/mute assignment, Direct out, Delay, recall safe enable etc. • Channel Library recall and store (input/output channel/EQ/Dynamics are currently supported) • Mix Send copy and paste (in SoF selection pop-up) • Mute group and DCA group assignment • Various minor improvements and fixes

• Adds compatibility with CL firmware V5 (please note, this version of CL StageMix is not compatible with any CL firmware version earlier than V4.0). • Minor bug fixes and improvements

The following issues are fixed: • EQ thumbnails were not drawn correctly in custom layer mixer view, when using Precise/Aggressive/Smooth EQ types with V4.x firmware. • Incorrect local custom layer assignment and name data was loaded during console connection after a Mixer Preset of a different model of console had been previously edited. • The Mix ON key in the Selected Mix overview in Sends on Fader Mode, did not behave correctly when muted from either a Mute or DCA Group.

• Customizable meter bridge layer • Monitoring/Controlling of non-Dante Shure wireless receivers • Multi-Channel Input Patching function • Other minor bug fixes and improvements

• Compatibility with CL firmware version V4.10 (please note: this version of StageMix is not compatible with any CL firmware version earlier than V3) • Added Input patch editing • Added Output Port patch editing • Added control and monitoring of Shure ULXD4D and ULXD4Q devices (requires V4.1.0 firmware upwards) • Minor bug fixes and other small improvements Compatibility: iOS 8 or later

• Minor bug fixes and other small improvements Compatibility: iOS 8 or later

• Compatibility with CL firmware versions 3.0 and higher (please note: this version of StageMix is not compatible with any earlier CL firmware versions) • Bug fixes, including the following: o Corrected a problem that could prevent GEQ and PEQ curves from drawing in the Editor screens if the Rack was accessed directly from the Master Channel Bank o In some circumstances, channel ON buttons would not flash when another channel was Soloed when Solo in Place mode was active o CUE button status may not be correctly updated after the Cue Mode is changed on the console o Other small bugs Compatibility: iOS 8 or later

• Compatibility with CL firmware versions 3.0 and higher (please note: this version of StageMix is not compatible with any earlier CL firmware versions) • Full Effects Editing capabilities, including graphical editing of Reverb and Delay effect programs • Access to the GEQ and EFFECT racks • Control of new EQ algorithms for 4-band and 8-band Parametric EQ: Precise, Aggressive, Smooth and Legacy* • Support for Second Cue Bus Mode including Remote mode which allows StageMix to control an independent Cue bus (separate from the console’s Cue bus)* • Support for Solo mode* * These features require CL V4 firmware or higher Compatibility: Requires iOS 8 or later

• Bug fix to improve gain reduction metering for Dynamics processors in the Mixer screen.

• Fixed a bug that could prevent CL StageMix from synchronizing properly with the CL V2.0x console.

* Important notice of bug with CL/QL StageMix V5.1 Yamaha has recently become aware of issues that could prevent CL/QL StageMix V5.1 from synchronizing properly with the consoles using CL V2.0x or QL V1.0x firmware. At this time, we would recommend that users of consoles with V2.0x/V1.0x firmware should not update to StageMix V5.1. We are working hard to provide a fix for this problem as soon as possible. • Compatibility with CL firmware versions 2.0, 3.0 and 3.1 (please note: this version of StageMix is not compatible with any earlier CL firmware versions) • 121-band mode for the built-in Real Time Analyzer • Timeline Location in the USB Recorder* o Drag the timeline dot to locate to any position in the song o Enter a time address to locate to a specific position • Dual Oscillator control: SINE 2CH mode added in the Oscillator screen* • Assignment of Channels to the Stereo or Mono Busses • Warning message appears when Enable Phantom Power Switching is OFF * These features require CL V3 firmware or higher Compatibility: Requires iOS 6 or later

• Bug fixes

•Compatibility with CL firmware versions 2.0 and 3.0 (please note: this version of StageMix is not compatible with any earlier CL firmware versions) •Real Time Analyzer via iPad microphone •Support for Multiple iPad connections (up to 5) * •8-band Parametric EQ control * •USB Recorder control * •Surround Panning control * •Mix to Matrix Sends •Support for dB Displays in the Mixer Window •Support for Output Channel Linking * *These features require CL V3 firmware Compatibility: Requires iOS 6 or later

• Compatibility with CL firmware versions 1.7 and 2.0 (please note: this version of StageMix is not compatible with any earlier CL firmware versions) • Full Control of the Console’s Oscillator • Direct Channel Navigation in the PEQ/GEQ/Dynamics editor screens • Global Pre/Post setting for Mix Sends • Mute Group Names • Analog Gain / Digital Gain Linking • Insert 1/2 for GEQs

• Compatibility with CL firmware versions 1.6 and 1.7 (please note: this version of StageMix is not compatible with any earlier CL firmware versions) • Support for four input meter points including Pre Digital Gain and Post Digital Gain • Several minor bug fixes

• Compatibility with iOS 7 • Minor bug fixes

• Dynamics Processor Editing • Output Port Delay Editing • Output Port Phase • Output Port Levels (Gain) • PEQ Copy/Paste • Phantom Power Switching • Mix Send Pre/Post Switching • HPF Slope Parameter (CL V1.5 only) • Retina Display Support

•This version is compatible with CL console firmware V1.1 to V1.5.